We have 20-yr old equipment that still utilizes POTS that we’ll have to upgrade when Verizon gets their wish. We had just reconfigured things to leverage Verizon POTS because the terrestrial phone provider abandoned their service suddenly last year. I was hoping it’d be good for a while. No such luck.
The most common routers here in Germany have POTS connectors and convert that to VOIP internally. At least for POTS with DTMF. I keep one specific router around that even still supports pulse dialing as I have two rotary phones from the 1950s and 1970s still hooked up for fun. (They work, except for the fact that nobody knows the number of my land line)
When the biggest provider in Germany switched from POTS and ISDN to VOIP there was also a number of solutions available for bigger installations, so you could keep your POTS installation while the adapter does the VOIP conversion.
It’s an old FritzBox where I turned off wifi etc and just use for VOIP - Pots. When I set it up a some time ago it was EUR 15 or so on ebay, as these old FritzBoxes have no other modern use. They put out “just” enough juice to ring the phone. Ringing is softer than what I know from. my childhood, though.
Pulse dialing works, but you can’t pause while dialing as it interprets a pause as “now connect the call”. (Real POTS had “incremental” dialing)
I have these phones for fun, but if I’d need to use them I’d probably buy a new dedicated voip adapter (EUR 150+).
Old FritzBox routers are cheap here, that’s why I use them.
Fair enough.
POTS is all but dead in Australia (chopped up for NBN FTTN), pretty sure most of Europe killed ‘real’ POTS in the 80s with ISDN.
US is actually an outlier still having a copper pair that’s purely analogue.
We have 20-yr old equipment that still utilizes POTS that we’ll have to upgrade when Verizon gets their wish. We had just reconfigured things to leverage Verizon POTS because the terrestrial phone provider abandoned their service suddenly last year. I was hoping it’d be good for a while. No such luck.
The most common routers here in Germany have POTS connectors and convert that to VOIP internally. At least for POTS with DTMF. I keep one specific router around that even still supports pulse dialing as I have two rotary phones from the 1950s and 1970s still hooked up for fun. (They work, except for the fact that nobody knows the number of my land line)
When the biggest provider in Germany switched from POTS and ISDN to VOIP there was also a number of solutions available for bigger installations, so you could keep your POTS installation while the adapter does the VOIP conversion.
So all in all switching worked mostly fine.
This router can put out enough juice to ring them like normal? If so what’s the model?
It’s an old FritzBox where I turned off wifi etc and just use for VOIP - Pots. When I set it up a some time ago it was EUR 15 or so on ebay, as these old FritzBoxes have no other modern use. They put out “just” enough juice to ring the phone. Ringing is softer than what I know from. my childhood, though.
Pulse dialing works, but you can’t pause while dialing as it interprets a pause as “now connect the call”. (Real POTS had “incremental” dialing)
I have these phones for fun, but if I’d need to use them I’d probably buy a new dedicated voip adapter (EUR 150+).
Old FritzBox routers are cheap here, that’s why I use them.